Deco Flashing Blue after Reset: Troubleshooting Guides
Is your TP-Link Deco flashing blue even after a reset? This guide will walk you through why it happens and how to fix it. The TP-Link Deco is a win-win device which gives best network coverage and extended WiFi signals to each and every corner of the premises. Users prefer TP-Link deco set up with Deco app, so the foremost important step is to download the Deco app.
This Deco device has an LED light which emits variant colours for specific reasons. Each colour represents the various stages of system setup. To understand it in a better way,have a look at the table below:
| RED | BLUE | WHITE | YELLOW |
|---|---|---|---|
| Internet connection issue. | Internet connection issue. | Internet connection issue. | Deco is resetting |
Now, you have got the basic idea that flashing blue light indicates TP-Link Deco is ready for installation, so install it to the earliest. Even after the installation Deco keeps flashing blue light let’s understand in depth the reason it.
Reason TP-Link Deco flashing blue light after Reset
It is always advisable to reset a device when it is not working properly. Resetting helps to remove the temporary glitches in the system and erases all customized settings from the network. If the Deco is flashing blue after this reset process, it also means that now the system is ready for setup.
If problem persist after the setup then do check the connection between the modem and the main unit. You can perform following troubleshooting checks.
Troubleshooting Guides
Check the connections
Please make sure that the Deco unit is plugged into a smoothly working electrical socket. LAN cable must be in good shape and connected firmly. The power adapter of meh unit should be authentic and well connected.
Reboot your Deco system
Deco flashing red light indicates some internet connectivity issue.To fix the technical issues and safety hacks you need perform the reboot. You just need to plug out the Deco unit out of power socket. Pause for couple of seconds and then re-plug it. Observe if, you are still able to locate the flashing blue light issue.
Re-positioning Deco unit
When Tp-Link Deco satellite flashes blue light, try to place it closer to the main unit. Doing so will help to establish a firm internet connection which in turn boost the setup process. Moreover, make sure to place the Deco units away from the electromagnetic waves emitting devices like microwaves, radios, TV etc. Other metal objects, large water units like fish tanks, big furniture and thick walls could be a hindrance in the network as well.
Factory default reset
If nothing works perform factory reset so that you can install it all over again. You can do it via Deco app or manually pressing the reset button on the device. With app follow the steps:
Network page>Network map>Deco unit>Remove
You will notice yellow light means device is resetting. Then it will turn into blue indicating that you can set up the Deco once again.
To sum it up, would like to mention that flashing blue light is not an error in fact device indicates it is ready for setup. If it persists for longer duration continuously then do speak to the support staff for help!