How to Factory Reset Deco X55 – Two Methods Explained

Is your Deco X55 mesh system not working? Is it not connecting to the internet? Well, it is a sign that you need to reset Deco X55. Know that resetting the mesh system will fix all the issues at once and allows you to perform TP Link Deco setup once again so that you can have a rejuvenating internet experience. Walk through the post and learn how you can restore your X55 mesh system to the default factory settings.

How to Factory Reset Deco X55?

There are two methods that can be used to reset the Deco X55 mesh system to the default factory settings. In the first method, you need to press the Reset button (Manual method). In the second method, you need to access the settings of the mesh system through the app (via app). Here’s how you can reset the Deco.

1. Manual Method (via Reset Button)

• First of all, ensure that your Deco is plugged in and is fully powered up.
• Now, check the bottom of the Deco unit and find the button labeled Reset.
• Press the button for a second.
• Your Deco X55 will reset.

In this manner, you can restore your Deco mesh system to the default factory settings using the Manual method. However, if you want to use the app-based method, you need to follow the steps provided in the next section.

2. Reset via Deco App

• Open the Deco app on a mobile phone connected to the Deco X55 mesh network.
• If you are not logged in, log in using your TP-Link ID.
• Go to the Network Map on the Network page.
• Tap the Deco unit that you wish to restore to the default settings.
• Go to the top-right corner and tap the button present there.
• Tap Remove.
• The Deco unit will reset.

This is how to factory reset Deco X55 to the default settings. Now that you have restored the Deco to default settings, you can set it up once again. To have a glimpse of the setup process, refer to the instructions provided in the next section. However, if you have reset the satellite Deco, we recommend you tap the Add Deco option in the Deco app and follow the on-screen prompts.

How to Set Up TP-Link Deco X55?

• Ensure that all the Deco units are working on the default settings.
• Now, choose one Deco unit and connect it to your modem.
• Switch on the modem and then the Deco X55 unit.
• Once the Deco gets powered up, connect your mobile phone to the WiFi network.
• The default settings of the Deco mesh are given on its label.
• Now, launch the Deco app.
• Log in with your TP-Link ID.
• The app will then provide you with a few prompts.
• Walk through the on-screen instructions and set up the mesh system again from scratch.

To Sum Up

Our guide explaining how to factory reset Deco X55 ends here. It is expected that you have gone through both the methods very carefully and you will be able to perform factory reset as well as the installation process of the mesh network as per your requirement.