TP Link Deco AX3000 Not Connecting to Internet: Troubleshooting
TP Link Deco AX3000 is mesh WiFi system known for helping you stay connected to the internet all the time. But, if the mesh system itself does not connect to the internet, problems can appear. In this blog, we will discuss some tips that will help you fix the TP Link Deco AX3000 not connecting to internet issue easily.
Fix: TP Link Deco AX3000 Not Connecting to Internet
A lot of reasons can be there due to which Deco AX3000 does not connect to the internet. We will discuss them later in the blog. But, let us first make you aware of the basic reason. The master Deco connects to the ONT or modem with the help of an Ethernet cable and the reason why AX3000 is not connecting to the internet is that the cable is damaged. Check the entire length of the cable and if it is found damaged, you should not waste much time replacing it. If that does not help you out, follow the given techniques.
Restart the Deco
Restarting the Deco mesh system can help you address the issue. Just disconnect the power cord of the Deco unit after detaching it from the modem. After that, wait for a few minutes and reconnect the power cord of your Deco. Re-establish the LAN connection between the Deco master unit and the modem. Check the internet connection now.
Update the Deco
If it is the satellite Deco that does not connect to the internet, it is recommended that you upgrade the firmware by accessing the TP Link Deco setup URL on a web browser. You can also use the Deco app for the same. But, make sure that the device in use is connected to the WiFi network of your TP-Link Deco.
Change the Location of Deco
There are chances that the location at which you have placed your Deco unit is not letting it connect to the internet. Thus, check the surrounding of the Deco AX3000. If you find any object containing a large amount of water, you are suggested to change the location. Additionally, the Deco node should be kept away from devices emitting electromagnetic frequencies and reflexive surfaces. Do not forget the fact that nodes should be in the central areas of their placement.
Note: The issue we are discussing right now can also be an outcome of the internet issue from the end of your ISP. Thus, we recommend you get in touch with the ISP and verify whether everything is fine from his end. If not, give him some time to get the issue resolved.
Ensure Stable Power Supply
The power being supplied to your Deco must be stable. That will only be possible if you connect AX3000 to a working power socket. Thus, do not use damages sockets for the purpose of powering up your Deco units.
Reset the Deco AX3000
Lastly, if the Deco is still not ready to get connected to the internet, we advise you perform a factory default reset of the main node. For that, press the Reset button on its bottom panel for a second. The main Deco will reset and also restore other Decos to the default settings. Once done, set up the Deco once again.
The Final Words
The TP Link Deco AX3000 not connecting to internet issue is an outcome of various reasons. Hopefully, with the help of the troubleshooting techniques we have provided you in this write-up, you will be able to make things up and running once again.