Is Your Deco Flashing Red Light? Let’s Fix It

If you’re experiencing issues with your TP-Link Deco router, you might notice the Deco flashing red or Deco blinking red. This Deco red light is a clear indicator that something isn’t working as it should. A Deco router red light can signal various connectivity or hardware issues. Understanding why your TP-Link Deco is flashing red can help you quickly resolve the problem and restore your network’s performance.

Reasons: Why Deco Flashing Red Light

There are several reasons why your TP Link deco blinking red light. Here, in this section of the blog, a list will be displayed which contains reasons of the issue.

• Deco main unit is not in the reach of the other Deco satellites.
• Other reason is Deco is not connected to the main router or modem and not receiving internet.
• Networking interruption is another reason why your Deco units are flashing red lights.
• One of the other reasons is that your deco has been overheated and wants a break.

So, these were the possible causing factor why your Deco flashing red light on the front. Now, let’s see how to Fix how to fix deco red light issue with the help of simple tips and solutions.

How to Fix Deco Red Light Issue

We will provide major five solutions and troubleshooting tips which will definitely solve Deco Blinking Red Light issue.

Connect Deco Close to Each Other

You should check that the Deco devices are close to each other or the system is within the range in your house. If not, then change the location of the devices and place them close.

Check Link Between Home Network and Deco

Connection between the deco main unit and modem or main router of you house must be correct. Make sure the home network device LAN port is connected to the WAN port of the main deco unit.

Also, check the Ethernet cable is in good condition and if it is damaged then replace it with new one.

Dispel Signal Blockage

Your deco device WiFi signals can be interrupted by electronic devices like microwave ovens. You must check that the networking devices are not placed close to the any electronic device. If you find one close, then change the location right away and find a optimal one in your house. This is one of the reason why your deco flashing red light or deco not working.

Give Deco Device a Short Break

If your device is getting overheat and deco blinking red light, then you have to give a break by turn it off and disconnecting all the internet device from it. To turn off the deco device; you can press the power button once or unplug the power cord from the wall socket.

Reboot Deco Mesh System

At last, if all the above given tips and solutions are not fixing the Deco red light problem, then you have to reboot the device. To initiate the process, you just have to press the Power button twice. By hitting the power button first time the device will turn off and second time it will restart.

Ending Thoughts

A Deco flashing red light on your TP-Link router indicates a problem, but it’s usually easy to fix. Whether it’s due to poor placement, connectivity issues, signal interference, or overheating, the troubleshooting tips provided can help you quickly resolve the issue. If these steps don’t work, consider rebooting the system or seeking professional help to restore your network.